Roys Adaptation Nursing Model free essay sample

This paper discusses the Adaptation Nursing Model developed by Sister Callista Roy. This paper concludes that the Adaptation Nursing Model can touch the innermost only of the healthy and curably ill patients. Table of Contents The Life History of Sister Callista Roy A Clinical Scenario The Nursing Process According to the Roy Adaptation Model Strengths and Weaknesses Conclusions Her Adaptation Model had spread far and wide by 1981 and she and her colleagues started giving consultations to other schools on it. Many schools adapted it and soon she was a speaker through the Continent and in other countries. Her other ensuing engagements include a two-year postdoctoral program in Neuroscience Nursing at the University of California at San Francisco where she developed the concept of a holistic person. (Office of the Nurse Theorist); teaching at the graduate level at the same University and at Boston College.; co-chairing Knowledge Conferences hosted by the Boston College School of Nursing from 1996 to 1998 and from 2000 to 2001; and progressively expanding and upgrading her Model. We will write a custom essay sample on Roys Adaptation Nursing Model or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page

Respond To Withdrawal Behaviors Example

Respond To Withdrawal Behaviors Example Respond To Withdrawal Behaviors – Coursework Example Employee Turnover: Voluntary and Involuntary Turnover. al Affiliation) In expanding on my colleagues posting, I will talkabout employee turnover. Employee turnover is when an employee leaves a company for reasons. Voluntary turnover is when an employee leaves an organization out of his or her own will. On the other hand, involuntary turnover entails employees leaving being controlled by the organization (Holtom, et al., 2008).Employee turnover can be affected by the P-O fit that is the compatibility of an employee and the organization they are working for. The P-O fit has been analyzed in terms of value congruence that is the compatibility between the employee and organizational values. There is the goal congruence that is the affinity of the employees and organizational goals. Employees without either value congruence or goal congruence tend to leave an organization because of the incompatibility between them and the organization. Additionally, job in satisfaction results in an empl oyee leaving an organization voluntarily, for example a supervisor harassing an employee will make the employee to quit. The lack of peace in their work place will lower their performance, therefore reducing the possibilities for them to get promoted. Involuntary turnover can occur when an organization needs to reduce staff because of change in business focus. For instance, Nokia Company used to do rubber works and cable works company and now they do mobile phones and mobile games this affected the staff for they had to be fired for the job no longer suited that staff for the new company’s work. Violation of company’s policies such as stealing from an organization can lead an employee being terminated which is among involuntary turnover.In conclusion, an employee can leave an organization based on either reasons, that are influenced by the organization or the employee’s reasons. ReferenceHoltom, B. C., Mitchell, T. R., Lee, T. W. and Eberly.M.B (2008). Turnover and Retention: A Glance at the Past, a Closer Review of the Present, and a Venture into the Future.

An Analysis of the Impact of Decreasing Trees in the Amazon Rain Forest

An Analysis of the Impact of Decreasing Trees in the Amazon Rain Forest Environmental Issue In recent years, there have been concerted efforts by leaders and nations around the world to confront the array of environmental issues currently facing the global community. Whether coming through dedicated promises to scale back on detrimental practices, or taking action in reducing the unsustainable business operations that many undertake, it is clear that we are at a pivotal time in history that will determine the well-being and future of our planet. In doing so, there are a plethora of issues that threaten future generations and environmental stability, with one of the more prominent and wide-reaching being that of deforestation. The concept of deforestation, in a simplistic sense, is that of cutting down trees and natural agricultural life as a means of using the lumber and resources for production purposes. Undoubtedly, trees are a crucial part in providing lumber for a broad range of activities, ranging from papermaking to building homes, and without such natural resources w ould have made it historically impossible to scale and grow civilizations at the rate that they have. However, recent technological advancements have provided new means of producing the very same resources in more sustainable manners, yet major corporations and proponents of deforestation continue to employ practices that are unsustainable. In order to better understand the overarching impacts of deforestation, it is necessary to first analyze the historical background of the issue, and how it has become such a major issue today. In doing so, deforestation has had a long history, dating back more than 500 years, as humans realized the benefits that came with transforming trees into lumber and other raw materials to be used in the production of various goods. As such, the impacts of deforestation and the centuries which it has lasted have left marks on the natural world, providing insight as to how detrimental it has been. Studies provide insight into the various periods throughout human history wherein deforestation occurred, shedding light on how long the practice has truly been around. As such, â€Å"In the classical worldGreek expansion to the eastern Mediterranean and Roman expansion westward led to remarkable deforestation; the consequent soil degradation was a major factor in the decline of the classical world. F or the medieval periodthe ways in which remarkable increases in population, medieval technology of plows and horsepower, cottage industry, shipbuilding, and crusades led to large-scale deforestation.† (Williams, 2008) Although these are only two examples of specific eras where deforestation was witnessed, it is clear that the methodologies existed for much of human history, and have only been magnified at scale in recent years. With the start of the Industrial Revolution throughout Europe, and processes of acquiring these resources became more automated, the world shifted into an era of inordinate unsustainability, one in which the modern community is continuing to undergo. As these actions became more efficient and profitable, it has since led to extensive declines in the forests around the world, with one of the most notable including that of the Amazon rainforest. Before delving into the case of the Amazon rainforest, it is necessary to touch on the impacts that deforestation has on the global community. In doing so, â€Å"the act of deforestation has impacted on the world in term of depreciating the natural environment and wildlife. It has also impacted on humans on the account of changes in environmental support processes such as weather conditionsFor more than one hundred years, the number of trees on the planet has plummeted, resulting in devastating consequences such as biodiversity loss, soil erosion, species extinction, global warming, and interference with the water cycle.† (EarthEclipse) The inevitable and explicit impacts of deforestation are apparent in the continued detriment to the climate, degradation of animal species and biodiversity, and an overall skewing of the Earth’s natural processes. In this regard, deforestation has had some of the most significant impacts on human lifestyles and the planet as a whole, beg ging the question as to why new methodologies have yet to be implemented. When it comes to the Amazon rainforest, this region is renown for its lush and vibrant ecology, the abundance of animal and insect species that find their homes in the area, and unfortunately, is one of the few remaining thriving rainforests left in the global community. With a plethora of resources available for commercial reasons, corporations began to take advantage of the benefits the region would provide them, setting up their operations in close proximity in order to maximize their profits. Specifically so, â€Å"forests in the Amazon were cleared faster than ever before in the late 1970s through the mid-2000s. Vast areas of rainforest were felled for cattle pasture and soy farms, drowned for dams, dug up for minerals, and bulldozed for towns and colonization projects. At the same time, the proliferation of roads opened previously inaccessible forests to settlement by poor farmers, illegal logging, and land speculators.† (Butler, 2017) With productions processes growing more and more efficient, large corporations opted out of changing their strategies towards sustainability, and rather continued to use detrimental practices to fuel their revenues and bottom line. The impact that these large corporations have had on the Amazon rainforest is breathtakingly disastrous, and manifest themselves in various ways. This includes the degradation of ecosystems and animal life, leading to extinctions of species, increased fires as a result of selective logging, natural droughts, record-breaking pollution levels found in the air, as well as natural disasters such as landslides that have directly cost human lives. These are just a few of the overt and explicit effects that deforestation has had on the Amazon rainforest, as such effects continue to worsen without any meaningful reform taking place. Understandably so, the issues that are debated on both sides have created chatter in the public sphere, making it clear that there must be some extent of resolution fo und to alleviate the concerns of both sides. However, thus far, attempts to implement such policies have been futile, despite the capabilities that advancements have provided to reduce reliance on natural resources derived from deforestation. Stakeholder Groups In understanding the various stakeholder groups which exist in regards to the deforestation issue, it can be found that these people include the heads of corporations that find their industry reliant upon these resources, environmentalists that believe reform can be made to allow for more sustainable productions, as well as public policy officials that aim to appease both of the aforementioned stakeholders to remain popular and be reelected. These three groups all of differing intentions and arguments when it comes to deforestation, and providing a cohesive resolution for all sides is the only way to reduce the level of forest clearing that has run rampant in recent years. First and foremost, it is crucial to understand the arguments and claims made by corporate individuals, as they look to increase their profits and ensure their companies continue to thrive. One of the primary arguments made by proponents of deforestation is that it provides a greater area to be inhabited by people, especially considering the burgeoning population issue that is currently taking place. In doing so, their claims state that, â€Å"with 10 billion people expected to be on the planet by 2050 and the never-ending growth explosion in sight, space has become more of a premium necessity on Earth. When there are forests on lands that could be utilized for habitation, then removing them can create more livable space. Commercial establishments and homes will also be built using the products that have been removed from the biome.† (GreenGarage) This point, which is valid in and of itself, then is backed up by another argument, that the resources derived from deforestation c an be used to better the lives of individuals who use those resources. Whether lumber for homes, or the plants and parts used to make paper and napkins, corporate executives can make the argument that deforestation provides the resources and goods that people purchase around the world. Another common claim that is made by proponents of deforestation is that it provides much needed economic support to the nations in which the practice occurs. Due to the fact that many of the major forests, especially the Amazons, are present in underdeveloped and impoverished countries, companies claim that deforestation allows them to establish operations in these countries, providing jobs for the locals who desperately need them. In this sense, the proposed establishments will bring about a win-win situation, both due to the affordable labor and acquisition to resources for the major companies, as well as providing wages and means of subsistence for people who live within close proximity of the forests and factories in question. According to proponents, deforestation creates job opportunities, given that â€Å"as deforestation increases demand from the lumber, manufacture, transportation, and construction industries, more people will be needed to get the job done, thus an increas e in employment opportunities.† (FutureofWorking, 2016) Although this is undoubtedly a reasonable claim to make, the fact of the matter is that such jobs and employment have not benefitted those who are living in the area. Rather, any employment opportunities have been meager and detrimental to the laborers, as their wages are immensely subpar and working conditions can be dangerous. When it comes to the environmentalist viewpoint on deforestation, it is clear why so many eco-conscious and environmentally-friendly individuals have denounced the clearing of rainforests. In doing so, there are many arguments that are made in terms of the sustainability and capability to keep up these practices, and the overarching impacts that they have on the natural world. In doing so, one of the foremost claims regarding deforestation made by environmentalists is that such practices can lead to permanent and negligent outcomes for the planet, and the climate which is present throughout it. As such, â€Å"excessive clearing or thinning of forests can destabilize the world’s climate by releasing into the atmosphere millions of tons of greenhouse gasses normally stored in wood in the form of carbon. This can damage the atmosphere and lead to global warming and eventually climate change. By storing carbon, forests provide a major environmental benefit by reducing global warm ing.† (CIFOR) This is a claim not only echoed by opponents of deforestation, but similarly the world community, as the impacts and consequences of climate change are becoming ever more prevalent throughout the world, and measures are being taken to combat this issue. If deforestation remains such a prominent practice in the corporate and commercial world, it can lead to detrimental impacts of releasing more greenhouse gasses into the environment, which has already been scientifically proven to dramatically alter the climate and weather of the planet. This is a relevant and valid argument against deforestation, as the consequences that are apparent have a far more detrimental outcome than the positives that are proposed. Furthermore, another reason why environmentalists are so severely against the concept of deforestation, is due to the fact that it has disastrous effects on the biodiversity and ecosystems of the abundant plant and animal life that find their homes in the Amazon rainforest. In doing so, â€Å"most of the planet’s valuable biodiversity is within forests, particularly tropical ones. Moist tropical forests such as the Amazon have the greatest concentrations of animal and plant species of any terrestrial ecosystem; perhaps two-thirds of Earth’s species live only in these forests. As deforestation proceeds, it has the potential to cause the extinction of increasing numbers of these species.† (Pimm, 2016) With more animal species becoming extinct what seems like on a daily basis, it is clear that the impact of human’s has had an unnatural effect on the animals and other living creatures that are on the planet as well. These different species similarly have impor tant roles in the global community, and the eradication of their kind can lead to imbalance and unwanted consequences in the future if not confronted. This is a valid claim made by many environmentalists in regards to the results of deforestation, and provides insight as to how unsustainable practices can be detrimental to the Earth, and to our own species in terms of the lifestyles that are currently lived. The final group of stakeholders in this regard is that of policymakers around the world, but more specifically and importantly, those in the United States. It is apparent in the global community that many follow the lead established by US politicians, and the actions taken by them can make meaningful impacts when done in the right way. In regards to their interests and needs, these policymakers are primarily focused on catering to the interests of their constituents so as to be reelected, as well as the whim of corporate lobby groups, from whom they receive immense amounts of funding and campaign contributions to be reelected at all. This has created an interesting and difficult dichotomy between the interests of people and corporations, with the latter emerging victorious for the most part. This is primarily due to the fact that the general constituency is less aware of the environmental matters at hand, and do not have the funding to make it a widespread issue come election time. N onetheless, it is these people that have the capabilities and power to implement policy reforms that will benefit the environmental world, and without their leadership, no such changes can be made. Policy Approaches and Analysis The current policy in regards to deforestation is quite lax and nonexistent to begin with. Corporations have the ability to reach out to foreign governments, such as the ones in Brazil, and establish partnerships by which the company can establish their manufacturing plants in prime locations with close proximity to the rainforests, and on the other end the government is paid out quite handsomely by these corporate executives. Although the Brazilian government has become far more protective about their rainforests, the reality is that the United States has done little-to-nothing to dissuade corporations that are already established in the country to implement new and more sustainable processes. This, as a result, has led to no decrease in the purchase of raw materials coming out of the Amazon, and rather incentivized corporations to continue their destructive behavior. One of the potential policy options that can be implemented to combat deforestation is that of corporate establishments. In doing so, â€Å"one of the most profitable and ecologically sound alternatives to mass deforestation in the Amazon is to attract not only responsible logging companies but entice these companies to build production facilities within the nations that they are logging from. Most of the logging industry cuts down the timber and immediately ships it to foreign countries where their factories process the wood into timber and other wood products.† (Blahnik, 2002) The fact is, that even though companies claim they are bringing jobs into the country, they are simultaneously doing everything they can to pay as little as possible for the finished goods. Given the restrictions on some forms of timber and logging, corporations ship out their products immediately so that they are not tracked or cause concern for conservationist groups in the country. By enforcing law s that would ensure these companies set up their production facilities in the home country in which they get their resources, it would not only decrease the amount of deforestation that occurs, but furthermore provide the jobs that they claim to want to provide. A second way to ensure that deforestation can be better regulated and decreased in the global community, is through an incentive or punishment type of policy that can be levied by world governments. In doing so, â€Å"financial incentives created by REDD+ can also change business practices. The success of ‘payments for environmental services’ in such countries as Costa Rica and Mexico and the work of Brazilian ranchers and nongovernmental organizations to develop sustainable agriculture standards show how this can be done. Economic incentives combined with political activism offer a powerful lever for promoting development without deforestation.† (UCSUSA, 2010) The benefit of this is that companies can be provided incentives monetarily if they fit certain standards, and implement practices that would offset their negative impact on the environment. On the other hand, there can also be a punishment if there is an unwillingness to implement such operations. In doin g so, major countries that purchase from these companies, namely the United States, can levy higher tariffs and taxes on imports of these goods and the corporation as a whole, which will reduce the desire to practice unsustainably. Essentially, this will allow corporations the option to adopt the more ethical and conscious practices as a means of not only reducing their environmental footprint, but being able to sell their goods at a more effective and efficient manner Conclusion Overall, when looking at the concept of deforestation, and the widespread detriment it has caused to the environmental world, it is clear that we are reaching a point in history, where our actions will have long-term, perhaps permanent, effects and consequences on the planet. With deforestation ramping up as a result of technological advancements and innovations, it is even more important that these progressions are used for positive means, and not destructive ones. By implementing new policies and reforms that will empower corporations to be more sustainable, while punishing the ones who forgo the needs of the natural environment, it will reduce the level of unsustainable deforestation in the global community, while ensuring that the benefits and advantages of such regions remain intact for years to come.

Designing a whole school approach to the management of student Essay

Designing a whole school approach to the management of student behaviour - Essay Example The school is situated in beautiful surrounding and has adequate space for play and extra curricular activity. However, it is found that the material facilities were not proving enough for the success of educational goals of the school. The school was established in the year 1982. The mission of the school was to provide world class education with the aim of developing and shaping students to become complete human beings rather than just focusing on their education. The school has been doing good with the ideas and the plans that were implemented by the founders. The staff of the school is a senior staff working since the establishment and believe in following the same ideas that were implemented when the school was established. Only three teachers are new and they are efficient in their job of handling students. The staff has meetings with parents every month and the discussion mostly focuses on the performance of their children in school. The teachers used to have meetings every week with their management staff to discuss the progress of the curriculum, behavior problems in classrooms, measures for improvement and overall performance of the class. However, the solutions were never discussed. The meetings were taken in a very mechanical way and there was no fruitful interaction between the teachers and the management representatives. Teachers who have joined recently were not encouraged to share their thoughts or opinions. The classes are functioning on strict disciplinary rules and have set guidelines for behavior. The students who perform well in their studies are rewarded every month and get recognition throughout the school as their photos are published in school

Autism Spectrum Disorder Essay Example | Topics and Well Written Essays - 1000 words - 1

Autism Spectrum Disorder - Essay Example The difficulty with ASD with regard to diagnosis is that there are no markers from biology to identify the condition, and so clinical interviews are the primary means of diagnosis (Skafidas et al. 2012). Moreover, as with other mental health conditions, the definition of the condition has been shifting, leading to changes as well in the way some of the conditions associated with ASD are viewed, diagnosed, and treated (Carey 2012; Wallace 2012). Be that as it may, there are universally accepted key markers for autism in general and for ASD in particular, including an inability to function well in social settings, due to shortcomings in skills tied to communication and general social skills (American Speech-Language-Hearing Association 2013).   Moreover, the qualifications above notwithstanding, the medical literature is clear as to what the symptoms and signs of ASD are. Some of the literature classifies the symptoms along three categories, social skills, communication skills, and r eacting to the general outside reality. With regard to the third category, people with ASD show a lack of fear when facing danger, object attachments of unusual intensity, difficulties adjusting to routine alterations,   sleeping and eating problems, and movements of self-stimulation, such as rocking. Communication skills symptoms include problems with articulation of needs, difficulty in being able to address questions, and echoing back words said to them. Social skills symptoms include inability to make eye contact.... Moreover, the qualifications above notwithstanding, the medical literature is clear as to what the symptoms and signs of ASD are. Some of the literature classifies the symptoms along three categories, social skills, communication skills, and reacting to the general outside reality. With regard to the third category, people with ASD show a lack of fear when facing danger, object attachments of unusual intensity, difficulties adjusting to routine alterations, sleeping and eating problems, and movements of self-stimulation, such as rocking. Communication skills symptoms include problems with articulation of needs, difficulty in being able to address questions, and echoing back words said to them. Social skills symptoms include inability to make eye contact, difficulties in making friends, aversion to touch, and ill-timed and mismatching emotional reactions (American Speech-Language-Hearing Association 2013). Another set of literature meanwhile focuses likewise on the inability of childr en with ASD to develop imagination in the social sense, such as an inability to participate in what is known as pretend play or social play (American Speech-Language-Hearing Association 2013; The National Autistic Society 2013). Then too, there are aspects of ASD associated with children regressing in terms of the skill sets identified above, from a point of prior more advanced proficiency or level of development (National Institutes of Health 2013). III. Teaching Strategies The literature describes many teaching strategies and interventions that have been known to be effective in improving learning and life outcomes for children with ASD, developed over

Submit Gulf Real Estate Properties Essay Example for Free

Submit Gulf Real Estate Properties Essay Many people dream of having a home with an ocean view from their home. Being able to walk onto your patio, sit, and admire a sunset sound like a scene in a Nicholas Sparks’ novel. So it should come to no surprise that homes with a scenic ocean view can demand a high price in the real estate market. Below you will see just how different the price from a sample of Florida condominiums sold with and without views of the Gulf of Mexico can demand. The Gulf Real Estate Properties, Inc has provided data from 58 condominiums they have sold. The sample is broken up into 40 condominiums with Gulf of Mexico views, and 18 without. Module 5: Gulf Real Estate Properties Mean â€Å"The mean is the average of the numbers. In other words it is the sum divided by the count,† (Math is Fun, 2014). Finding the mean of each sample of data is rather easy, you add them up and divide by the sample size. In every category the condominiums with a view out performed the other condominiums. The mean of the Gulf View Condominiums’ List Price and Sale Price are higher, and the number of days it takes to sell the home is less. To simplify the Gulf View Condominiums sell for more and quicker. Gulf View Condominiums have a mean price of 600.73, while No Gulf View Condominiums have a mean of 204.95. The difference between these two numbers could be argued that Gulf of Mexico views can increase a home’s selling price by almost three times its current asking price. Like the List Price the Sale Price mean favors the Gulf View Condominiums. The average Sale Price of the Gulf View Condominiums is 578.86, whereas the No Gulf View Condominiums have an average o f 196.43. The one statistic that No Gulf View Condominiums do not want to be higher than the Gulf View Condominiums is the one statistic that they are higher on. When you are trying to sell a home, you do not want it to take forever. The No Gulf View Condominiums take a mean of 237.45 days to sell, compared to Gulf View Condominiums taking only 184.9 days. That is a difference of 52.55, or a week shy of two months more to sell a condominium. When you look at the difference of the List Price subtracted by the Sale Price, a real estate agent could make it look in favor of the Gulf View Condominiums. The Gulf View Condominiums have a difference of  21.87, whereas the No Gulf View Condominiums is only 8.52. This difference makes it look like No Gulf View Condominiums sell closer to their list price, but this is untrue. Instead of subtracting the mean Sale Price from the List Price, and you divide the Sale Price by the List Price you get the percentile of the difference. In doing this you learn that on average the Gulf View Condominiums retain 96.36% of their listing price, where as the No Gulf View Condominiums only retain 95.85%. So not only do the gulf view homes list and sell for more quickly but they also sell closer to their list value. Mode â€Å"The mode is the value that occurs with the greatest frequency,† (Fundamentals of Business Statistics, 2011). The only category that both the condominiums have a mode in is the List Price. No Gulf View Condominiums have a mode List Price of 203 and Gulf View Condominiums have a mode of 336. This information could be used to skew information showing that the List Price between the two categories is closer than they actually are. Range The range of data is the largest value subtracted with the lowest value. The range can show the vast difference between homes. The Gulf View Condominiums have significantly higher List Price and Sale Price. This is reasonable conclusion as Gulf View Condominiums have created a more â€Å"dream home,† market. The Gulf View Condominiums List Price and Sales Price are 819 and 813.3, compared to No Gulf View Condominiums 168 and 160.9. Another way to show the extreme price range of the Gulf View Condominiums comparing the fact that the No Gulf View Condominiums highest selling home is a List Price of 299 and Sales Price of 282.6, and the Gulf View Condominium is 974 and 958.4 respectively. That is well over three times the value of No Gulf View Condominiums highest selling condominium. Days to Sell are the one range that is similar, although it still by far favors the Gulf View Condominiums. Gulf View Condominiums have a range of 252, whereas the No Gulf View Condominiums is 339. This makes a difference of 87; almost three months higher for No Gulf View Condominiums. This means property owners without a Gulf of Mexico view should be prepared that if they sell their home it could sit significantly longer on the market. Median and Inter-quartiles Range The inter-quartile range is away to overcome extreme values in the data. The second inter-quartile is also the median. The median for our sample is the average of the middle two observations in any column. The inter-quartile range is another tool that shows the discrepancy between the two condominiums. The Gulf View Condominiums first inter-quartile’s List Price and Sale Price is higher than the No Gulf View Condominiums fourth inter-quartile respectively. This shows that the bottom 25% of the Gulf View Condominiums are out listing and selling all of the No Gulf View Condominiums. In all of the Days to Sell inter-quartiles ranges Margin of Error With a margin of error you are essentially trying to find out how big of a change your calculations can be off. Think of senators in Congress. Every state has two senators, and if both senators in Colorado voted â€Å"yes,† on a bill does that mean every person residing in Colorado wanted that bill to pass? No, what it would mean, hopefully, is that the majority of the state would want it to pass. One way that you can assist in making a margin of error being more accurate is by making the sample size closer to the population. For example, Colorado’s House of Representatives would be more likely to vote accordingly with its state’s population than the Senate because it has seven representatives versus two. Unfortuanetely in our condominium war both the List Price and Sale Price margin of error is higher with Gulf View Condominiums. Despite Gulf Real Estate Properties Inc providing more data for the Gulf View Condominiums, these condominiums had a larger margin of error than the No Gulf View Condominiums. The reason for this is the fact that the List and Sale Price range of Gulf View Condominiums were also so much more spread out. The only area in the margin of error field that the Gulf View Condominiums beat the No Gulf View Condominiums is in the Days to Sell, this makes sense as Gulf View Condominiums proved a larger sample size and a smaller Days to Sell range for the calculations. Problem Solving For the branch managers desired sample size I came up with a sample size of 31 for the Gulf View Condominiums, and a sample size of 14 for the No Gulf View Condominiums. As for what the two List Price should sell for I found  the Gulf View to sell for approximately $567,562 and the No Gulf View to sell for $273,156. Conclusion While the No Gulf View Condominiums did have a smaller margin of error in almost every other category they were less successful. It comes as no surprise that ocean view properties would out sell non-ocean view properties in Florida. The good news for Gulf Real Estate Properties Inc is that this gives them opportunities of investment on properties. If the company was asked to sell a property that was in the lower inter-quartile, they could potentially purchase it themselves, remodel it, and sell if for a price closer to their third inter-quartile. Also, the information gathered regarding the price discrepancies between the two groups can help real estate agents direct future clients to specific homes based on their wants, needs, and price points. References Math is Fun. (2014). How to Find the Mean. MathisFun.com. Retrieved from http://www.mathsisfun.com/mean.html Sweeney, D., Williams, T., Anderson, D. (2011). Measures of Location. Fundamentals of Business Statistics 6th Edition. South-Western Cengage Learning.

Journal of JFK assasination :: essays research papers

November 22, 1963 The cheers and cries of the crowd were roaring and still escalating as he approached. The 1961 Lincoln Continental peered over the corner. The flap of hands in the air blocked the lens momentarily. Two security motorcycles made the turn on Elm Street and I felt excitement circulate my entire body as I knew any second the 35th President of the United States, John F. Kennedy, would appear. My legs trembled as I felt the breeze of the motorcade approach me. I was perched on a stone on Elm Street grasping my 8mm Bell and Howell camera. To Kennedy’s request his automobile would be without a top. Kennedy was now focused on my camera. I attentively filmed the hands of the President waving to the crowds of spectators; but if they had only known they were about to be spectators of a ghastly tragedy. And right then and there, on a clear November 22, 1963, John Fitzgerald Kennedy was assassinated. The laudation of the motorcade instantly turned into an outcry of thousands. An ineffable b lanket of terror covered me; yet I stood concretely filming the bomb of blood explode in my front of my eyes until the vehicle violently swerved and disappeared into an overpass. My heart dropped to the floor. I saw the world, I felt the world enter utter commotion, but my ears were not receptive to sound. A silence domed the scene. BOOM! The unbearable noise rang in my ears. I saw his body jump forward and his head swing back wildly†¦I stared, I tried, but I could no longer be reluctant to the truth. September 5, 1959 The scolding became part of the norm. The drill sergeant loved to yell and torment all of those under his command. I felt compassion especially for a man who seemed to have persistent trouble with the Corps. He was considered an outcast by many. Out in the range he had very poor marksmanship. Drill Sergeant Peters seemed to enjoy decrying this man. If he would become hesitant due to exhaustion from physical training, Sergeant Peters would soon enough get on his case and verbally torture him. I looked into the man’s eyes and saw a subtle expression of fear, anger, and distress cooking up all at once. A mask veiled despondent inside of him. He surely was not an exceptional shooter, or the fittest man there.

Essential Parts of Computer and How It Works

Contents II. Introduction2 III. Computers2 A. CPU2 B. Memory storage3 1. Primary storage3 2. Secondary storage4 C. Peripherals8 1. Ink-jets (bubble-jets) printers8 2. Laserjet printers9 IV. Connecting To Internet10 V. Conclusion12 VI. Reference List13 * Introduction Nowadays, running business in 20th century means that you got to be clever about technology. When companies are striving for higher achievements and more-efficient workability, innovation is what everyone craving for. That’s the spot where technology shoots. Computer is one essential breed of our modern technology. However, while the majority of people know how to use computer, they don’t know how the machine works; the technical stuff. It becomes a problem when the technical stuff got broken and almost everybody does not get a clue. To improve our business means that we need to improve our consciousness to computer itself. So, with this guide, I hope we can understand the system of our computer, not just by its advantages, but by its personality too. Enjoy a new relationship with your computer. Computers For this matter, these are some of essential parts from computer that support its function A. Central Processing Unit (CPU) B. Storage devices C. Peripherals CPU Central Processing Unit (CPU), or called as processor, is the central part of computer, which accepts and processes data into information and maintaining its system (Gilster, 2000). In comparison, a brain to human is the same for CPU to computer. It stabilizes and ensuring computer to run normal. Moursund (1978) says that CPU consists of two units: control unit and arithmetic/logic unit. The control unit gives instructions to the system for executing programs. The control unit doesn’t do the tasks, but just giving orders to other units to do its jobs. The arithmetic/logic unit execute arithmetic and mathematical equations in the system, like addition, subtraction, multiplication, and division. To work in a constant and stabile period of time, CPU uses a small quartz crystal called the clock system (Shelly, Cashman, Vermaat, 2008). The system clock produces electronic pulses, or ticks, that set the operating period to the components of the system unit. The clock system speed is measured by the number of ticks per second or Hertz unit. Hertz (Hz) is the measurement of speed in data processing. The faster the clock speed, the more instructions the processor can execute per second. For usage in our computer schools, there are two brand options, AMD & Intel. AMD’s Athlon X2 Dual Core, and Intel’s Pentium D 925, both of them have 3 GHz clock speeds which are compatible for our student’s needs in computer. I recommend Intel’s for our school since it has lower price than AMD. AMD has lower heat though in its operation, but this problem can be maintained by putting a fine working fan to cool the processor. Memory storage Extra There are terms of measure we need to know that used in byte (B) and hertz (Hz). They are: 1 Kilo (KB/ KHz) = 1000 (B/Hz) 1 Mega (MB/MHz) = 1000 Kilo = 1,000,000 (B/Hz) Giga (GB/GHz) = 1,000,000 = 1,000,000,000 (B/Hz) 1 Tera (TB/THz) = 1000 Giga = 1,000,000 Mega = 1,000,000,000 Kilo = 1000,000,000,000 (B/Hz) (Shelly et al. , 2008) Memory storage is the place where computer store all data and information in the machine. To measure memory storage, we use Byte unit. Byte is the measurement of space, determines the quan tity of data that memory can save. There are two kinds of memory storage: primary storage & secondary storage. Primary storage RAM Random Access Memory (RAM), is used to open up programs, images, or any details when the computer is on. Its function is to accelerate the speed of processing programs. When the computer is off, the memory loses its data too and will be restarting when the computer is on again. That’s why RAM also called as temporary memory (Stokes, 2008). ROM Read-Only Memory (ROM) is used to store essential programs for computer, such as system operation (Smith, 2011). Data in ROMs cannot be changed again or written, unless for some types of ROM like EPROM (erasable programme read-only memory) or using some technique like exposing ROM to sunlight. Cache Cache located between CPU and RAM. It is a high-speed memory that accelerates CPU to exchange information from RAM (Shelly, et al, 2008). Cache works in a frequently accessible files and programs in the computer so it can be processed in shorter time. For example, a secretary’s computer which used for typing a lot will have its word-processing program opened faster than the other staffs’ computer. Secondary storage * Stokes (2008) states that secondary storage is used for saving files and information in the matter of capacity. When programs are installed into the computer or files are inserted, secondary memory is the place where all the stuffs are put into. It gives information about how much computer can store data in its system. Files, programs, and other stuffs that put in secondary storage are saved permanently in the system. So, when the computer is off, the stuffs will stay at the same state and condition without having any lost parts. Picture 2. 1 Secondary storage works like cloth drawers for computers. As long as there is a space, it is fine to put more things. Image source: http://corriehaffly. wordpress. com There are various forms of secondary storage. Some attached in CPU and some is separated from computer. These are the kinds of it. Hard Disk Picture 2. 2 Physical appearance of a hard disk. Image source: http://www. pcguide. com A hard disk is a metal platter coated with magnetic oxide that can be magnetized to represent data (Shelly, et al, 2008). The large disk has top side and bottom side which used for recording and storing data in computer. To be used, hard disk must be attached in computer. Optical Disc Picture 2. 3 Physical appearance of optical disc. Image source: http://www. digitalmatrix. us An optical disc is a flat, round, portable, disc made of metal, plastic, and lacquer. These discs usually have 4. 75 inches in diameter and less than one-twentieth of an inch thick (Shelly, et al, 2008). Optical disc commonly used for storing music, pictures, or programs depend on its capacity. There are many types of optical discs. Some types can be used for reading and recording files in it, some can only be used for read. CD-ROM A CD-ROM (Compact Disc Read-Only Memory), is a type of optical disc that can only be used for read the files in it (Shelly, et al. , 2008). The disc’s content cannot be write-able or erase-able anymore. A typical CD-ROM has capacity from 650 MB to 1 GB of data, instructions, and information. To read a CD-ROM, you can use CD-ROM drive or CD-ROM player. Commonly, CD-ROM is used in licensed application, programs, music albums, or encyclopaedias so it cannot be pirated. CD-R and CD-RW A CD-R (Compact Disc Recordable) is a multisession optical disc which users can write, but cannot erase the items in it, like text, graphic, or audio. Multisession means you can write on part of the disc one time and another part at a later time (Shelly, et al. , 2008). Write in this term means to record files. A CD-R can only be written once and the content cannot be erased. To write and read a CD-R, you need a CD-R drive. DVD-ROM and DVD-R A DVD-ROM (Digital Versatile Disc Read-Only Memory or Digital Video Disc Read-Only Memory) is a high capacity optical disc on which users can read but not write or erase (Shelly, et al. , 2008). To read a DVD-ROM, you need DVD-ROM software. DVD-R has the same characteristic as CD-R, only with bigger capacity. DVDs usually has 4 GB capacity. Flash Memory Picture 2. 4 Physical appearance of flash memory. Image source: http://techcrunch. com Flash memory is a small, portable stick which implanted electrical chips that used to store files in computer (Shelly, et al. , 2008). Its size is none bigger than adult human thumb. It connects to a computer via an USB port. Its files can be read and written in multiple times. Flash memory has various capacities, from 256 MB until 32 GB are available in stores. Peripherals Peripherals are electronic devices that support computer functions to more useful and understandable (Gilster, 2000). Peripherals commonly consist of computer screen, speaker, printer, keyboard, and mouse. Each device is connected through port cables that inserted into CPU ports. In this handout, I would like to discuss the function of printer itself. Since it is a primary office need, so it is nice to know and be aware for this machine. Printer is an electronic device that used for printing images and texts in computer file, usually using papers as its medium (Gilster, 2000). There are many types of printers which available in the market and usually used for business and office work. Ink-jets (bubble-jets) printers Picture 3. 1 Bubble jet printer. Image source: http://www. inkjet-laser. com Ink-jet printer sprays ionized tiny inks on the paper. The printing pattern is organized by using magnetized plates in printer (Shelly et al. , 2008). It can produce high quality images that frequently used for photography. There are models that designed to black and white (B/W) colour printings too. Laserjet printers Picture 3. 2 Laser printer. Image source: http://www. hypercup. org Laser printers works by using lasers that melts powdered inks in cartridges, then the ink putted on a paper by desired pattern (Shelly et al. , 2008). Photocopy services usually use this type due to its fast process. Here are the comparisons of bubble jet printer and laser printers as shown below. Ink-jet Printer| Laserjet Printer| 1. Print by spraying inks into paper, which makes the ink is more liquid on paper. If the paper is touched or get heated, the ink can melt and smear the paper| 1. Print by heated powdered inks with laser. The ink is fast to dry. | 2. Printing process are quiet and does not cause any mechanical noise| 2. Printing process causes mechanical noise. | 3. Many models come in portable sizes, which are suitable for home and personal use that do not demand frequent printing. 3. There are portable sizes and large sizes. Portable size are suitable for home and personal use, while large sizes are suitable for office or business use that demands frequent printing. | 4. The quality of printing can be adjusted for faster printing process| 4. The quality of printing cannot be adjusted| Ink-jet Printer vs. Laser Jet Printer (Frost, 2010) Connecting To Internet To obtain much informatio n, internet is always helpful for providing sources anywhere and anytime. Connecting our computer to internet means that open the access of our computer through signals. To make it do so, computers are needed to be included in a network. Network is a group of computers and devices that connected together through communication devices and transmission media (Sosinsky, 2009). It is used in houses, cafes, libraries, or offices for many purposes, even for personal or business purposes. The ability of network allows people to communicate through each other (in verbal or in visual), sharing files, transfer money, etc. As Sosinsky (2009) states, network’s patterns are divided into two categories: client/server and peer-to-peer. 1. Client/server One computer works as a server, then the other computers or devices in network work as client. A server controls access to the hardware, software, and other resources in network. It makes a server the centre storage of programs, data, and information. The clients are other computers and devices that rely on a server for its resources. 2. Peer-to-peer Peer-to-peer system is like two friends sharing stories to each other. One has useful information that the other one did not know, and vice-versa. In this network, each computer, called a peer, has different responsibility and capability, sharing hardware (e. printer), data, or information with other computers. Each computer has its files in own storage, but also have the same operating system and application software that allows them to connected to each other. For creating networks, computers need some equipment to make them connected through each other. Here are some services which make our computer available to internet. 1. Dial-Up M odems Dial-up modems are working by using telephone devices. When a computer connects to internet, computer transmits digital signals which converted into analog signal then it is transmitted over standard telephone lines (Shelly, et al. 2008). The internet speed is up to 56 kilobyte/second. Many people do not really interested in using dial-up modems now because it requires one telephone lines for working and other services have faster speed. 2. Broadband Services Broadband internet is a high-speed internet that connected through a wire (Shelly, et al. , 2008). Broadband internet services are provided through vary methods. Some known methods are: a) DSL (digital subscriber line), using telephone lines but does not interfere telephone connection; b) A cable modem that uses cable television network ) A Wi-Fi (wireless fidelity) network uses radio signals to provide internet connection to computers and devices. Conclusion CPU plays the part of accepting data and processed it into rele vant and understandable information based on logic and arithmetic way of work. Data and information that has been processed comes in the shape of programs and files. The computer’s program and files are kept in memory storage. Some memory storage attached in computer, like hard disks, RAMs, ROMs, Registers, and Caches. Some are separated from computer for its portability, like optical discs and thumb drives. Printers are machines that used for printing and photocopying documents and images in computer. This can be used for printing in colour and black/white printings. Connecting computer to internet means to put it into a network. In a network, computer users can obtain information from many other sources and communicate with other computer users. Internet can be accessible through these two services, dial-up modem and broadband internet services. Through this guide, I delighted if you feel informed and become more common to computers. Knowing new things means to get to you into new insights. I hope the knowledge you read here can be useful for now and the future. Reference List Cashman, T. J. , Shelly, G. B. & Vermaat, M. E. (2008). Discovering computers 2008 complete. Boston, Massachusetts: Thomson Course Technology. Cashman, T. J. , Shelly, G. B. & Vermaat, M. E. (2008). Discovering computers fundamentals (4th eds. ). Boston, Massachusetts: Thomson Course Technology. Frost, M. (2010). Laser vs. inkjet printers. Retrieved September 28, 2011, from http://www. ehow. com/about_5390377_laser-vs-inkjet-printers. html Gilster, R. (2001). PC hardware: a beginner’s guide. Berkeley: Osborne/McGraw-Hill Moore, C. Laserjet vs. Inkjet. (n. d). Retrieved September 20, 2011, fromhttp://www. ehow. com/about_5327065_laserjet-vs-inkjet. html Moursund, D. G. (1978). Basic programming for computer literacy. New York: McGraw-Hill Smith, M. (2011). What is read only memory. Retrieved September 28, 2011, fromhttp://www. ehow. com/info_8751600_readonly-memory. html Sosinsky, B. (2009). Networking bible. New York: John Wiley and Sons. Stokes, A. P. (2008). Is this thing going on. New York: Workman. How computer work: the CPU and memory. (n. d). Retrieved September 19, 2011, from http://homepage. cs. uri. edu/faculty/wolfe/book/Readings/Reading04. htm

Human motivation Essay

Introduction: A person is a complex creature who goes through a variety of developmental changes in his life. Each of these changes, a particular learning occurs. When we learn, we organize, shape, and strengthen our brain. Humans are like machines who never get tired of learning. From the day we are born, our brain works and encode those that we have learned in the web connections of our brain. But what does learning mean? Learning is how one acquires new information about the world he lives in. It is how he interprets and understands reality in a way that his behavior changes because of those learned information or knowledge. Learning is also said to be an active process in which the learner uses sensory input and constructs meaning out of those things that has to be learned. The learner needs to do something to be able to learn because learning is not just a passive acceptance of knowledge and ideas of a person alone, but rather, an activity or process which involves the learner to engage with the world he is in. Motivation on the other hand is a key component in learning. Essential because it includes an understanding of ways in which the knowledge can be used. Unless we know the reason why, we may not be very involved in using the knowledge that may be instilled in us, even with the most intensive, severe, rigid, and direct type of teaching. When one is not motivated to learn, teaching becomes ineffective and useless. Motivation is an inner state of need or desire that activates an individual to do something that will satisfy that need or desire. Motivation is derived from the need or desires internal to the individual such that others cannot motivate an individual but must manipulate environmental variables that may result in an increase or decrease of motivation. The relationship between motivation and learning is connected and are mutually causal. That is, those individuals, â€Å"who are more motivated learn more†¦those who learn more become more motivated† (Richmond, 194). In classroom settings, the teacher uses an understanding of individual and group motivation and behavior to create a learning environment that encourages positive social interaction, active engagement in learning and self motivation. Knowing how to meet individual learner’s needs for control, competence, and belonging in the classroom is one key to student motivation to learn. Following are examples of learning as tied to human motivation. Teacher Rose is a regular teacher of 45 students in a public school. Three of her students are repeaters and two manifests symptoms of mild retardation. Their presence in class causes her stress and anxiety not because she don’t want these children there but because she feels like she is not able to help them as she‘s supposed to be. Since there are no special schools in the place to cater the needs of these children, she decided to apply for a scholarship at the district office to study Special Education. The process was not an easy one but because of her desire to help these children, she was able to graduate and earned a degree in Special Education. Now she’s more fulfilled and happy because she is able and capable of teaching and handling these types of children. Sir Benjamin on the other hand is a teacher who wishes to become a lawyer someday. But due to poverty, this dream remains only a dream. When he got married and belittled by his in-laws, Sir Benjamin vowed to become a lawyer to prove that he can be somebody someday, a person his in-laws would respect and be proud of. When his marriage was annulled due to insistence of his in-laws, Sir Benjamin applied for a scholarship in a university to pursue his studies in Law. After painful years of studying and teaching at the same time, he was able to graduate and pass the board exam. Now, he is already a lawyer. Although he was not able to win back his beloved wife, he is still happy and proud because at last, he was able to fulfill his dream and was able to prove himself at the same time. Jane is also an example of a person who was able to fulfill and finish her studies because of her desire to help her parents. Due to poverty, Jane wasn’t able to pursue college education. She went to work in a restaurant for two years. When given a chance to apply for a scholarship at the Mayor’s office, she didn’t hesitate to ask permission from her employer. Working during the day and studying during the nights. The process was long and hard and yet she was able to graduate. She was very motivated to finish her studies because she needs to get a descent job so she would be able to send her younger brothers and sisters to school. Now, she works in a bank, a lot more comfortable and happier because she’s able to fulfill her dreams. Motivation therefore comes from within, and most people with intrinsic motivation are most likely to succeed.

Discussion Questions for In Cold Blood by Truman Capote

Discussion Questions for In Cold Blood by Truman Capote In Cold Blood by Truman Capote is a nonfiction  novel that tells the story of the murder of a Kansas family in 1959. Use these book club discussion questions on In Cold Blood to discuss Capotes literary masterpiece. Spoiler Warning: These questions reveal important details about In Cold Blood by Truman Capote. Finish the book before reading on. Book Club Discussion Questions How does Capote build suspense despite the fact that readers know the ultimate outcome from the beginning of In Cold Blood?​In what ways is In Cold Blood like a fiction novel? How does Capote report the facts and allow different voices to speak without using a journalistic style?In Cold Blood starts with details about the Clutter familys last day alive. Did any of the details particularly stick out to you? Did Capote make you feel attached to the family by sharing these details?Were there any other characters you empathized with because of small details Capote wrote about them? Bobby Rupp? Alvin Dewey?Why do you think Capote split the narrative into three sections? Why do you think he did not describe how the murders happened until Dick and Perry were caught and gave their confessions?Did you feel sympathy for Dick or Perry at any point?How did Capote humanize the killers? Were you surprised by how likable they could seem despite the brutality of their crime and unremorsefulne ss to the end? Capote seems to paint Perry in a more sympathetic light than Dick. He seems sensitive and even kind at points; however, by the end, you find out that Perry committed all four murders. Did that surprise you? Did you sympathize with Dick more than Perry at any point? Or did you not buy any of the kind characterizations?Do you think Dick and Perry were sane? Did the psychiatric analysis of them and descriptions of other cold-blooded killers surprise you? Scare you? Make you think differently about violent crime or the death penalty?Rate In Cold Blood by Truman Capote on a scale of one to five.

How Did the 1960's Change America Term Paper Example | Topics and Well Written Essays - 750 words

How Did the 1960's Change America - Term Paper Example In the years between 1955 and 1968, Martin Luther King took certain steps that changed the status of the blacks. He said, â€Å"Faith is taking the first step, even when you don’t see the whole staircase† (King cited in â€Å"Martin Luther King†). Martin Luther King’s efforts came to a stop in the year 1968 because he was murdered in this year during a protest in Tennessee. However, his dreams did not die with him. Another very important revolutionary political factor of the 1960s was John F Kennedy’s presidential term. He said, â€Å"Ask not what your country can do for you, but what you can do or your country† (Kennedy cited in â€Å"Ask not what†). This quote served as a potential drive for the youngsters to join the armed forces. John F Kennedy was among the four presidents in the history of the USA who were murdered. However, it was not until the assassination of John F Kennedy that the American presidents were provided with a pol ice force specifically for their protection. John F Kennedy participated in three events of huge significance in the history of the USA, which include the crisis of the Cuban Missile, the American Civil Rights Movement, and the construction of the Berlin Wall. Much of the USA’s status today can be attributed to the presidential term of John F Kennedy. Vietnam War, which is one of the most important wars in the history of the USA also took place during the 1960s. ... Regarding the Vietnam War, it was said, â€Å"Our resistance will be long and painful, but whatever the sacrifices, however long the struggle, we shall fight to the end, until Vietnam is fully independent and reunified† (Minh cited in Patrick). 1960s were very important for a change in the entertainment industry in the USA. Barbie Doll was the first toy that became available to the children in 1960. This inculcated an urge in the boys to have some toys of their own as there were some for the girls as well. This laid the basis of the creation of such other toys as the trolls as GI Joe. The development of these toys led to the creation of a whole range of toys that have today become the insignia of the American entertainment industry. Toys created then are still in use by children not only in the USA, but also elsewhere in the world. The social status of the USA has been greatly influenced by the culture of the Hippies that prevailed in the 1960s. Hippies were recognized as peop le who wanted the spread of love and peace. Their agenda was to create peace in the society as hundreds of thousands of people were losing their lives in the Vietnam War. Another important reason for this cause was the racism that had started to surface as a result of the changed social status of the blacks in the USA. Racism against the blacks was another very important social change of that time. Malcolm X and Martin Luther King Jr. were among the people who have fought a lot against racism. Concluding, there were a number of political and social factors that emerged in the 1960s that changed the USA and made it what she is today. The American society experienced a big change since the 1960s with the Dream

Measurement Essay Example | Topics and Well Written Essays - 1000 words

Measurement - Essay Example Without the invention of figures and measuring standards, it would be extremely difficult for industries to perform the tasks accurately and efficiently (Ambrose & Harris 45). One of the industries that measurement plays a large role in is Engineering and Construction and without this practice it would be extremely difficult for those working in this industry to perform their duties. Types of Measurement categories As mentioned earlier, there are different types of measurements that can be found with regard to what in particular an individual is trying to measure (Baines & Haslam 59). These measurements can either be used on their own or jointly depending on the task that the individual measuring wants to perform. The categories that are used for measurement of specific areas can be referred to as Units (Ambrose & Harris 36). Some of the aspects of objects that may require measuring include areas such as: Mass – This has to do with the weight of an object and is one of the mos t common aspects of measurement as it used in almost every single activity including the weighing of oneself in a bid to keep an eye on their body weight (Emerson 23). This is popularly referred to as body mass index. Length – This is in regard to how long an object is. ... Measurement Systems Measurement systems refer to the available units that an individual is able to conduct their measurements in (Emerson 47). The different systems available have different units of measurements that are used to calculate the various aspects of an object such as weight, length and so on. Three of the most common measurement systems that have been used over the years include the Imperial system and the SI system. The Imperial System This system is also known as the English system and was developed by the British. It was once the most popular system in use at one point in time before the switch to use of the SI system (Baines & Haslam 67). The main countries that used these system included the Common wealth countries, the United States and of course the Britons themselves. After a while the system became known as the U.S. Customary units as they maintained the use of these units after other countries made the switch to the SI system and it is still in use there and in certain Caribbean countries as well. Though Britain formally moderately changed to the SI system, many Imperial units still remain in use in this country. The SI System The full name for this particular system is the International System of Units and its abbreviation came from the French language (Systeme International d'Unites). It is a recent revision of the metric system and can be termed as the world’s most popular system of units at the moment with most countries either adapting all or part of the system (Ambrose & Harris 32). There are two categories of SI units in existence, they include the base units that deal with the simpler measurements such as time,